Features of SSC Service UtilityFreeze internal ink counters.
Hot swapping of cartridges supported.
More then 100 different Epson printers supported.
Reset internal ink counters even with empty cartridges.
Reset or rewrite any chip using special addon device.
Resetting of protection counter.
Separate cleaning of color and black heads for all Epson inkjet printers, powerful cleaning mode.
Work directly with CSIC in Epson Stylus printers cartridges.
Compatibility and LicenseIs SSC Service Utility free to download?SSC Service Utility is provided under a freeware license on Windows from printer software with no restrictions on usage. Download and installation of this PC software is free and 4.30 is the latest version last time we checked.
Select the 'Print' button in the Web-To-Page toolbar integrated into your Internet Explorer browser to start printing. This file self-extracts to your hard drive and is placed in c:epsonepson11667webtopage10aa.This utility requires Microsoft Internet Explorer 5.5 through version 6 (not for use with Internet Explorer 7 or later).Compatible systems:Windows XP 32-bit, Windows 2000, Windows 98, Windows MeNote:This file applies to numerous Epson products and may be compatible with operating systems that your model is not. Description:Epson EasyPrint is a software utility that makes it easier for you to adjust printer settings. You can select printer settings directly from the Print window, without having to click the Properties button. Epson EasyPrint is already included with Epson Smart Panel 3.2 and Epson Copy Utility 3.0.Compatible systems:Windows 8.1 32-bit, Windows 8.1 64-bit, Windows 8 32-bit, Windows 8 64-bit, Windows 7 32-bit, Windows 7 64-bit, Windows XP 32-bit, Windows XP 64-bit, Windows Vista 32-bit, Windows Vista 64-bit, Windows 2000Note:This file applies to numerous Epson products and may be compatible with operating systems that your model is not.
Epson R230 Printer Flash Software Free Download
The system warns us when the ink pad counter jet or full maximum prints (6200) flash all the lights so here you need to download and install the relevant software, It will reset your printer manually, and I think it will be useful for you.
SSC Service Utility is licensed as freeware for PC or laptop with Windows 32 bit and 64 bit operating system. It is in system miscellaneous category and is available to all software users as a free download.
CauseWhat to doYour computer may not be properly connected to the printer.Perform the setup procedure described in the Setup sheet.The interface cable may not be plugged in securely.Check both ends of the interface cable between the printer and the computer. You may not be using the correct interface cable.If you are using the USB interface, use a Revision 1.1 or 2.0 cable.Some error may have occurred.Check the lights on the Control Panel to see if lights other than power light are flashing or on in red. see Error indicatorsYour printer may have broken.Print the nozzle check pattern to see if the printer is broken. See Running a printer operation checkIf the printer does not print, it may broken. Contact your dealer.Your application software is not properly set up for your printer.Make sure that the printer is selected in your application software.Your computer system's memory is too small to handle the volume of data in your document.
Resetting your Epson printer (FREE)Modern Epson printers have built in software / firmware that counts the prints that you do and each model has a setlimit that will generate messages, saying something like "your printer requires maintenance" or "parts inside your printer may be worn". These messageswill continue unless you reset the 'Protection Counter', this period is called the 'Overflow'. Each model also has a setamount of prints allowed on the Overflow, after which your printer will stop working and lock you out completely (we call this 'Lock Out'),usually with two alternating flashing lights on the printer.All is not lost!You can unlock it, reset the overflow and reset the protection counter, bringing your printer back to life.The reason for having to do this according to Epson, is that your Ink Pads are full and need replacing.I had an Epson C86 printer reset under warranty by an Epson dealer and the ink pads were not replaced.This means that, all you really need to save your printer is the resetting software.If you have not already downloaded the program clickhere to download.How to use the softwareNote: this software will not work on certain Epson printer models such asthe RX500, so to manually reset this, click hereIt also only works on the older models, so for newer models such as the SX series and R / RX series we are currentlytrying to gather resetting software for your specific models. We have some new ones here for the SX410 & SX415(TX410 & TX415) and R265 / R285 / R360 / RX560, to download and for information, seebelow.Email from a user:It may help some of your customers to know that if using Windows 7 and needing to re-set an Epson Stylus Photo 915 you need to set the software to Compatibility mode Windows 7 before running the installer.Many thanks for your work in making this page! It was a great help.Philip(see full testimonials below)Installing and opening the software (SSC Service Utility ):Install Software ( ssc service utility ) by double clicking on the 'Set Up' file or 'sscserve.exe' you downloaded (firstunpack / unzip it if required).When Installed, Click on the [Start Button] on your computer desktop, then click on [Program Files] or [Programs] andselect SSC Service Utility from the list, this will open the program. If you chose to have a desktop shortcut when youinstalled the program, click this to start the program.Click on the [Configuration] tab and select your printer from both the [Installed Printers] and [Printer Models] lists.Please Note: Some models are listed with an 'x' in the model number, this means that the'x' can be a variety of numbers, for example, if you had an Epson C44 printer the selection for you would be the onethat looks like this 'C4x'. This is because the selection is the same for the C42, C44 & C46 printers.Also for R265 users, your printer isn't listed so select the R270 with this version (v4.3) until a newer version isavailable, I've been told this works.Now close the program and it will continue to run in your Task Bar on your computer desktop (Blue bar at thebottom of your computer screen).The icon looks like this You can now click the right mouse button on the icon in the Task Bar to use the menu you require.Using the software, tips and advice:If you require more images and simpler instructions for using this software, clickhere for the sscserve information page.Standard ResetIf your printer is giving warnings that your printer is due maintenance, this usually means that the printer has countedthe prints it has carried out and reached a predefined limit, the only requirement now is to reset the counter whichwill then release your printer hardware and start counting your prints from zero once more.Click the right mouse button on the program icon and select protection counter like so Click on 'Reset protection counter' and you'll be asked if you have replaced the ink pad, select Yes or OK, it will thensay counter reset.If you now select 'Show current value', it should show the counter as 0 (zero). If there are any numbers in the counteroverflow, click on 'clear counter overflow'.You are now ready to continue printing as normal as if your printer is brand new.
Close down all Epson programsExit all Epson printer programs that may be running in the background or on your task bar.The quickest way to do this is to press Ctrl, Alt & Del on your keyboard and release, which will open your WindowsTask Manager.Click on [Processes] and a list of all processes running on your computer will appear, look for any in the listthat say Epson, highlight it and select [End Process]. Carry this out for any Epson programs running.Now to reset your printer.Switch off the printer using the power button.PRESS and HOLD all following printer buttons: Power, Load/Eject,Stop, B&W, Color and continueto hold until "Init eeprom" appears on the printer screen, then RELEASEALL BUTTONS.Next press the Color button to clear the protection counter.Follow any other instructions given by the printer.Clean your print heads if print is not perfect.If your print is not perfect, this may be because your printer has not been used for a while and so the fixed printheads have dried ink on them.Simply open any document on your computer, click on [File] then [Print]. When your printer properties box opens click on[Properties] / [Preferences] then click on [Maintenance] / [Utility].You will need to carry out 3 head cleans with no printing of nozzle check patterns. To do this, click on [Head Clean],when finished it will ask you to "Print Nozzle Check Pattern". Don't allow this, click [Finish], then select[Head Clean] again carrying out the same process until you've cleaned the heads three times, then allow it to print thenozzle check pattern to check your print quality. If improved but not perfect carry out the above process again. Ifperfect, continue to use your printer as normal and try to use it at least once per fortnight.If absolutely no improvement is seen after cleaning the heads 3 times or more, your heads are severely blocked and willneed cleaning solution to resolve this. Please order the appropriate colour cleaning cartridge foryour Epson printer model, these are reusable and can be kept and stored for future use.If you have trouble following these cleaning instructions, please use our informationpage for step by step procedures with pictures.Cartridge Rejection Problems:With limited information on any actions you carried out prior to any error messages, I shall try to help you getyour printer running correctly.My assumption would be that your printer was out of ink on 1 cartridge and you changed a few cartridges at the sametime.1) This normally confuses the printer software, as it only expected 1 cartridge and will normally still showempty for those cartridges that were changed and didn't yet need changing.2) If any one of the cartridge microchips fail when you change more than 1 cartridge (when not required), theprinter will NOT tell you which chip has failed, it will mark them ALL as failed.Both problems above should be straight forward to sort out.The solution, is to use your printer maintenance software that is installed on your computer.If you are using a printer which has a small screen and a [Menu] / [Set Up] button, you can clear your problems in thesame way as below but, by using the printer maintenance software instead of the computer software.To get to the maintenance screen on the computer:Open any document such as a letter or a picture, click on [File] then [Print], when the printer properties box opens,click on [Properties] / [Preferences], then you'll see a [Maintenance] tab on the next screen, click on this and you'rethere.A lot of Epson printers have different maintenance tools and buttons.The one you need is called something like [Ink Cartridge Replacement].If you haven't got a button for this, click on [Head Clean] and it will refuse to clean the heads as you have acartridge problem or a cartridge needs replacing. Select [Replace] and you will start a 'wizard' in the same way as itwould start for an [Ink Cartridge Replacement] button, which is a step by step program. Read the screens that appear andkeep clicking next as if you were about to change a cartridge, until you have to click [OK] to move the print head tothe 'Change' position.___________________________________________________________________________________________________________For problem 1) above:If you are sure that all the applicable cartridges giving incorrect levels are full cartridges, open the flap that holdsthe cartridges down and (one at the time) unclip and lift each cartridge and press them back into place. This willtrigger the software into accepting the (not yet recognised) cartridge/s as new.Close the flap when finished and carry on with the on-screen step by steps.While the printer charges the ink nozzles, it will check your microchips on the cartridges.For problem 2) above:Open the flap that holds the cartridges down and unclip and lift the left-most cartridge and press it back into place.This will trigger the software into checking its chip, click OK to charge the nozzles and if this was the failedcartridge chip, the other cartridges will suddenly become recognised and that cartridge you just re-inserted (if stillshowing as failed) is the failed one that needs replacing.If you still have all cartridges unrecognised or showing failed. Start the wizard again in the same way and re-insertthe next cartridge in sequence. keep doing the whole procedure for all cartridges in sequence only until the softwareshows all other cartridges as recognised except the one you just re-inserted, or all cartridges as recognised (if it wasjust previously seated badly). Once a specific failed cartridge has been replaced with a new cartridge, all should bewell.___________________________________________________________________________________________________________You may now get some messages telling you they are not Epson cartridges and [Yes] / [No] to continue using thecartridge, obviously click [Yes].At this point, if there are any failed chips or empty cartridges that need replacing, you will be told to replace thoseapplicable before the wizard can complete.For any unrecognised chips, you can do the same process and just remove and refit that cartridge, incase it didn't makea perfect contact with the printer, this usually sorts that problem out, but if the software still tells you thecartridge is not recognised or has to be replaced then please replace it.This is one occasion where it pays to have spare cartridges ready to use.On fitting all relevant full cartridges, your printer should now show reasonably accurate ink levels and all cartridgeswill be accepted and ready for use.If you have used some ink from cartridges that are now showing full then further down the line you might find thatyou've completely emptied a cartridge before the software thinks it's empty. This cartridge colour will disappear fromyour pattern on the 'Nozzle Check' and must now be replaced, but if you haven't got an [Ink Cartridge Replacement]button and the software isn't asking for a cartridge to be replaced yet, this can be tricky.You will now have to clean your heads a few times, to use up some ink until a cartridge is recognised as empty, then youcan activate the wizard by clicking on the [Head Clean] button again, as above.For future information:If you are changing cartridges by pressing your ink button on the printer, only change the cartridges that are beingasked for and nothing else.If you are able to access the Ink Cartridge Replacement wizard on the computer, you can change anycartridge at any time, but consider how much ink you are throwing away by changing cartridges before they are empty.If you are using a printer which has its own small screen and a [Menu] / [Set Up] button, you can and should clear yourproblems in the same way as above, but by using the printer's maintenance software instead of the computer software.This information should be sufficient to clear 90% of Epson inkjet printer cartridge problems.For printer maintenance problems such as "Maintenance Required" or "Ink Pad Full", seeabove to download the resetting software and view the Epson printer resetting information.
2ff7e9595c
Comments